OVERVIEW ABOUT THIS ASTON MARTIN VALHALLA FOR SALE

This Aston Martin Valhalla for sale corresponds to an unbuilt production slot, offering the opportunity to buy and configure an Aston Martin Valhalla directly before assembly. Rather than a used or completed vehicle, this listing provides access to a client allocation, allowing full factory specification ahead of delivery.

The Aston Martin Valhalla is a mid-engine hybrid hypercar developed as a strategic bridge between Aston Martin’s road cars and its Formula One and endurance racing programs. First presented in 2019 under the internal designation AM-RB 003, the model was co-developed with Red Bull Advanced Technologies and officially entered production in 2023.

Positioned below the Valkyrie in Aston Martin’s hypercar hierarchy, the Valhalla introduces electrified performance into the brand’s lineup. It is powered by a 4.0-liter twin-turbocharged V8 sourced from Mercedes-AMG, combined with two electric motors, forming an all-wheel-drive hybrid system. Total system output is rated at 950 horsepower, placing the Valhalla among the most powerful production Aston Martin road cars ever engineered.

Production of the Aston Martin Valhalla is strictly limited to 500 units worldwide, all distributed through exclusive dealer and client allocations. As a result, Aston Martin Valhalla for sale listings remain rare, with most transactions occurring privately through allocation transfers rather than open-market inventory.

This Aston Martin Valhalla slot for sale allows the buyer to define exterior colors, interior materials, and bespoke options prior to production. The official Aston Martin Valhalla price at launch was approximately Β£1,000,000 excluding VAT, with market demand placing the model firmly in the sold-out hypercar segment.

As a factory-allocated slot, this Aston Martin Valhalla for sale represents an opportunity to acquire a new, unregistered Valhalla, configured to order, within a production run that is already closed to new buyers.

ASTON MARTIN VALHALLA

EXTERIOR AND INTERIOR ABOUT THIS ASTON MARTIN VALHALLA FOR SALE

The Aston Martin Valhalla is built around a full carbon-fiber monocoque, forming both the structural core and the exterior body architecture. This construction delivers high torsional rigidity while enabling an aggressive aerodynamic layout derived from Formula One and endurance racing principles.

As a mid-engine hypercar, the Valhalla integrates a comprehensive active aerodynamic system, including an active rear wing that continuously adjusts according to speed, driving mode, and dynamic load. At the front, wide air intakes, sharp splitters, and dedicated airflow channels are engineered to optimize cooling efficiency and generate controlled downforce. Air management extends through the roofline and rear bodywork, where F1-inspired airflow routing improves stability at high speed.

Design elements remain functional rather than decorative. Slim LED headlamps, sculpted carbon surfaces, and dihedral front-hinged doors are standard, reinforcing the Valhalla’s hypercar positioning. The roof and rear structure are shaped to guide airflow toward the rear diffuser and wing, contributing to aerodynamic balance rather than visual excess.

Wheel design follows a performance-first philosophy. Center-lock alloy wheels are used to reduce unsprung mass and improve brake cooling, with tire and wheel specifications optimized for high-speed stability and dynamic response. Exterior finishes for this Aston Martin Valhalla for sale remain fully configurable, with options including visible carbon fiber, bespoke metallic paints, and custom surface treatments available during the factory configuration phase.

Inside, the Aston Martin Valhalla interior is conceived as a driver-focused cockpit, emphasizing low seating position, structural visibility, and minimal mass. Interior architecture integrates carbon fiber elements throughout, combined with configurable materials such as leather and Alcantara. As this listing concerns a production slot, final interior specificationβ€”including seating type, trim finishes, and bespoke optionsβ€”will be defined directly with Aston Martin prior to production.

POWERTRAIN AND PERFORMANCE ABOUT THIS ASTON MARTIN VALHALLA FOR SALE

The Aston Martin Valhalla for sale, offered as a production slot, is based on a hybrid powertrain architecture combining internal combustion and electrification, developed through a collaboration between Aston Martin, Mercedes-AMG, and Red Bull Advanced Technologies.

The Aston Martin Valhalla is built around a carbon-fiber monocoque chassis, paired with a full carbon-fiber body, ensuring high structural rigidity and low mass. Aerodynamic performance is managed through an active rear wing with variable geometry, continuously adjusting downforce according to speed and driving conditions.

The final powertrain configuration marks a significant evolution from the original concept. While early development targeted a bespoke 3.0-liter turbocharged hybrid V6, the production Valhalla adopts a 4.0-liter twin-turbocharged V8 sourced from the Mercedes-AMG GT Black Series, mounted in a mid-rear longitudinal position.

The internal combustion engine alone delivers 750 horsepower (551 kW). This V8 is paired with two electric motors, one mounted on each axle, providing a combined electric output of 204 horsepower (150 kW). The resulting total system output reaches 950 horsepower (699 kW), positioning the Valhalla firmly within the modern hybrid hypercar segment.

The hybrid system enables a fully active all-wheel-drive configuration, with electric torque vectoring enhancing traction, cornering precision, and stability under acceleration. Instant torque delivery from the electric motors improves response at low and medium speeds, while the V8 provides sustained power at higher revs.

Power is transmitted through an 8-speed dual-clutch automatic transmission, designed to manage both combustion and electric torque seamlessly. Gear shifts are optimized for performance driving, with electronic control integrating hybrid energy deployment and regenerative braking.

Aston Martin officially states performance figures of 0–100 km/h in approximately 2.5 seconds, with a top speed electronically limited to 350 km/h (217 mph). The Valhalla’s target dry weight is approximately 1,350 kg, resulting in a power-to-weight ratio exceeding 0.70 hp per kilogram, a figure aligned with contemporary hypercar benchmarks.

Braking performance is handled by carbon-ceramic brake discs, measuring 410 mm at the front and 360 mm at the rear, combined with a brake-by-wire system that integrates regenerative energy recovery from the hybrid drivetrain. Stability systems include advanced traction control, electronic stability control, and hybrid-specific torque management strategies.

As this listing concerns an Aston Martin Valhalla slot for sale, final calibration of powertrain software, hybrid management, and driving modes will be completed during the factory configuration and pre-delivery phase, prior to production within the 2023–2027 manufacturing window.

RARITY AND MARKET VALUE ABOUT THIS ASTON MARTIN VALHALLA FOR SALE

The Aston Martin Valhalla was officially launched with a factory MSRP of approximately Β£1,000,000 excluding VAT, positioning it as Aston Martin’s first series-production hybrid hypercar below the Valkyrie. At launch exchange rates, this corresponded to roughly €1,150,000 to €1,200,000 excluding taxes, depending on market and allocation terms.

Production of the Aston Martin Valhalla is strictly limited to 500 units worldwide, with manufacturing starting in 2023 and extending through the mid-2020s. All units were allocated through a closed client and dealer network, resulting in sold-out primary availability shortly after production confirmation.

By late 2025, observed secondary-market prices for Aston Martin Valhalla allocations and early-delivery cars were typically recorded around €1,200,000 to €1,320,000, depending on delivery status, region, and configuration flexibility. These values reflect transactions and listings on the private resale market rather than public inventory.

Compared to the original European MSRP range, this pricing represents an approximate uplift of +5% to +15% over factory price, excluding taxes. The premium remains moderate relative to ultra-limited hypercars, reflecting the Valhalla’s positioning as a limited-production hybrid hypercar rather than a sub-200-unit halo model.

This Aston Martin Valhalla for sale, offered as an unbuilt production slot, retains full configuration flexibility, a factor that continues to support valuation compared to fixed-spec or already-registered examples. Market pricing is currently driven more by allocation scarcity and delivery timing than by speculative appreciation.

Fun facts about the Aston Martin Valhalla

  • The Valhalla appeared in No Time to Die (2021), the 25th James Bond film.
  • Its internal codename was AM-RB 003 before receiving the official name.
  • β€œValhalla” refers to the Norse mythological hall of slain warriors.
  • It was initially planned with a bespoke V6 hybrid, the engine spec was later upgraded.
  • Red Bull Advanced Technologies applied Formula One aerodynamic principles to the car.

Aston Martin Valhalla – Technical Spec

πŸ”§ Engine
  • Type: Internal combustion + hybrid system
  • Internal combustion: V8 4.0L twin-turbocharged
  • Electric motors: 2 permanent magnet synchronous units (one per axle)
  • Combined power: 950 hp (699 kW)
  • Combustion engine power: 750 hp (551 kW)
  • Electric motor power: 204 hp (150 kW)
  • Layout: Mid-mounted longitudinal
  • Aspiration: Twin-turbocharged
βš™οΈ Transmission
  • Type: Dual-clutch automatic
  • Gears: 8-speed
  • Shift mechanism: Electro-hydraulic
  • Drivetrain: All-wheel drive
  • Torque vectoring: Active via electric motors
πŸ›ž Chassis / Suspension
  • Chassis: Carbon-fiber monocoque
  • Body panels: Full carbon fiber
  • Suspension (front/rear): Multilink with adaptive dampers
  • Active systems: Adjustable ride height and dynamic chassis control
  • Development: Red Bull Advanced Technologies & Aston Martin
βš–οΈ Weight & Aerodynamics
  • Target dry weight: 1,350 kg
  • Power-to-weight (dry): 0.70 hp/kg
  • Drag coefficient: Not officially disclosed
  • Aero features:
    • Active rear wing
    • Front diffusers and underbody tunnels
    • Variable aero management
  • Balance: Mid-engine layout for optimal distribution
πŸ›‘ Braking System
  • Brake type: Carbon-ceramic
  • Front disc size: 410 mm
  • Rear disc size: 360 mm
  • System: Brake-by-wire with regenerative recovery
  • Stability systems: ESC, ABS with performance tuning
🧠 In-Car Technology
  • Driving modes: Road, Track, EV, Hybrid
  • Infotainment: Minimalist driver-focused interface
  • Instrumentation: Digital cluster with telemetry overlay
  • ADAS: Limited to performance telemetry (no autonomous features)
πŸ›ž Wheels & Tires
  • Wheels: Lightweight forged alloys, center-lock
  • Tire spec (front): 285/35 ZR20
  • Tire spec (rear): 325/30 ZR21
  • Tire brand: Michelin Pilot Sport Cup 2
  • Spare: None (track-focused configuration)
🏭 Production
  • Production years: From 2023
  • Planned units: 500 globally
  • VIN coding: Unique batch for Valhalla series
  • Recalls: None reported as of June 2025
πŸ”§ Maintenance
  • Oil change interval: Every 12 months or 10,000 km
  • Battery check: Annual hybrid system diagnostics
  • Brake service: Condition-based (track use affects frequency)
  • Estimated annual cost: ~€3,500 (road use), higher with track driving
  • Warranty: Manufacturer coverage (exact terms based on region)

FEATURES OF THIS ASTON MARTIN VALHALLA

Exterior – Custom Specification Pending
  • Exterior color: To be chosen by the buyer
  • Carbon elements: Optional high-gloss or satin visible carbon
  • Wheels: Range of forged center-lock designs available
  • Brake calipers: Configurable color and finish
  • Optional packs: Aero kit, carbon upgrades, visibility pack
  • Paint protection: Available as post-delivery treatment
Interior – Custom Specification Pending
  • Upholstery: Full custom trim via Aston Martin Q
  • Seat design: Track seats or comfort touring option
  • Stitching: Custom contrast, embroidery or laser-cut motifs
  • Interior materials: Leather, Alcantara, carbon or anodized metals
  • Audio system: Optional high-end system available
  • Additional options: Steering wheel shape, harnesses, infotainment

Photo credits: Β© Aston Martin