OVERVIEW ABOUT THIS FERRARI F80 FOR SALE
This Ferrari F80 for sale concerns a confirmed production slot for one of Ferrari’s next-generation hypercars, with scheduled delivery in 2026. Rather than a pre-owned vehicle, this listing offers the opportunity to configure a Ferrari F80 from factory specification, including exterior finishes, interior materials, and bespoke options, prior to production.
The Ferrari F80 marks a decisive technological shift in Ferrari’s hypercar lineage. For the first time, Ferrari replaces its traditional naturally aspirated V12 architecture with a hybrid powertrain derived directly from endurance racing, inspired by the Ferrari 499P, winner of the 24 Hours of Le Mans. The powertrain combines a 3.0-liter twin-turbocharged V6 with three electric motors, forming an electric all-wheel-drive (eAWD) system engineered for instantaneous torque delivery and optimized traction.
Total system output reaches 1,200 horsepower and 1,016 Nm of torque, positioning the F80 among the most powerful road-legal Ferraris ever developed. Power is delivered through an 8-speed dual-clutch transmission, integrating hybrid energy management and regenerative braking technologies derived from Formula 1 and endurance competition.
The Ferrari F80 was officially unveiled in October 2024, following an extended development and testing phase. Production of the coupé version is strictly limited to 799 units worldwide, reinforcing its positioning as an ultra-exclusive hypercar. An Aperta variant is expected to follow but has not yet been formally announced.
Built around a carbon-fiber monocoque, the Ferrari F80 achieves a dry weight of approximately 1,525 kg, with a weight distribution of 42.2% front and 57.8% rear, optimized for high-speed stability and dynamic balance. Active aerodynamic systems continuously adjust downforce and drag based on speed and driving conditions, reflecting direct transfer of Ferrari’s racing expertise to a road-going platform.
This Ferrari F80 slot for sale is offered with an open configuration, allowing full personalization prior to production. The current price indication for this Ferrari F80 slot is €4,500,000, reflecting both factory scarcity and early secondary-market demand. Initial market activity already places Ferrari F80 values significantly above the original factory pricing, underscoring strong collector interest ahead of first deliveries.
Ferrari F80 available for sale – SLOT
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
-
- Ferrari F80 available for sale – SLOT – Luxury Car Broker –
EXTERIOR AND INTERIOR ABOUT THIS FERRARI F80 FOR SALE
This Ferrari F80 for sale, offered as a production slot, provides access to Ferrari’s latest design and aerodynamic philosophy rather than a pre-configured vehicle. The final exterior and interior specifications remain fully configurable, allowing the future owner to define materials, finishes, and colors directly through Ferrari’s personalization process.
The Ferrari F80 adopts a design language directly inspired by Le Mans Hypercar prototypes and Formula 1, prioritizing aerodynamic efficiency over stylistic heritage cues. The body is structured around a carbon-fiber monocoque, forming the core of the vehicle’s rigidity while supporting Ferrari’s most advanced active aerodynamic systems to date. These systems continuously manage airflow, balancing downforce and drag in real time according to speed, driving mode, and load conditions.
Exterior elements are conceived as functional components rather than decorative features. The front and rear aerodynamic architecture integrates adaptive surfaces, optimized air channels, and an active rear system designed to stabilize the car at very high speed. Ferrari confirms a dry weight of approximately 1,525 kg, achieved through extensive use of carbon fiber and lightweight composite materials.
As this is a Ferrari F80 slot, exterior finishes may include full carbon configurations, exposed carbon elements, matte or metallic paints, and bespoke Ferrari Atelier options. Configurations such as Ferrari F80 black, all-black, or full carbon specifications remain subject to final factory approval and allocation rules.
Inside, the Ferrari F80 interior is conceived as a driver-focused environment, blending racing ergonomics with high-end craftsmanship. The cockpit architecture is built around lightweight carbon-fiber structures, integrating digital instrumentation, performance telemetry, and Formula 1–inspired controls. Interior materials typically combine carbon fiber, Alcantara, and leather, with full customization available at the configuration stage.
As with previous Ferrari halo models, this Ferrari F80 slot for sale grants access to Ferrari’s highest level of personalization, allowing the buyer to tailor seating, trims, stitching, and finishes before production. Final interior specifications will be confirmed during the factory configuration phase ahead of the scheduled 2026 delivery.
POWERTRAIN AND PERFORMANCE ABOUT THIS FERRARI F80 FOR SALE
This Ferrari F80 for sale, offered as a production slot, is based on Ferrari’s most advanced hybrid powertrain architecture ever deployed on a road-legal hypercar. The Ferrari F80 introduces a radical departure from Ferrari’s traditional V12 halo models by adopting a hybrid twin-turbocharged V6 system derived directly from Ferrari’s endurance racing program.
At the core of the system is a 3.0-liter twin-turbocharged V6 engine with a 120-degree bank angle, optimized for high-revving efficiency and compact packaging. The internal combustion engine delivers approximately 900 horsepower, while electrification contributes an additional 300 horsepower, resulting in a combined system output of 1,200 horsepower and 1,016 Nm of torque.
Hybrid assistance is provided by three electric motors, forming an electric all-wheel-drive (eAWD) configuration. Two electric motors are mounted on the front axle, delivering instant torque vectoring and enhanced traction, while a third electric motor is integrated at the rear, supporting acceleration, torque fill, and regenerative braking. This architecture enables precise torque distribution under both straight-line acceleration and corner exit.
Energy is supplied by a high-voltage lithium-ion battery pack designed for performance deployment rather than electric range. The system operates on an 800-volt electrical architecture, allowing rapid energy discharge and recovery during aggressive driving. Regenerative braking is fully integrated into the hybrid system, optimizing efficiency and sustained performance consistency.
Power delivery is managed by an 8-speed dual-clutch transmission (DCT), engineered to handle the combined output of the combustion engine and electric motors while ensuring ultra-fast gear changes. The drivetrain prioritizes immediate response and uninterrupted torque delivery, aligning with the F80’s role as a next-generation Ferrari hypercar.
Ferrari officially states performance figures of 0–100 km/h in approximately 2.15 seconds and 0–200 km/h in approximately 5.75 seconds, with a top speed of 350 km/h. These figures place the Ferrari F80 among the fastest road-legal Ferrari models ever produced and position it competitively within the current hypercar segment.
Chassis systems play a direct role in performance delivery. The Ferrari F80 features active suspension, advanced torque vectoring, and a fully integrated traction and stability control system calibrated to manage the hybrid powertrain’s output. Ferrari confirms a dry weight of approximately 1,525 kg, supported by a carbon-fiber monocoque and extensive use of lightweight composite materials.
As this listing concerns a Ferrari F80 slot for sale, final powertrain calibration, driving modes, and hybrid management settings will be validated during the factory configuration and pre-delivery phase ahead of the scheduled 2026 Ferrari F80 delivery.
RARITY AND MARKET VALUE ABOUT THIS FERRARI F80 FOR SALE
The Ferrari F80 was announced with a factory starting price of €2,950,000 excluding taxes in Europe. All production slots were allocated shortly after the official unveiling, eliminating any remaining primary-market availability.
Production of the Ferrari F80 is scheduled between 2025 and 2027, with a strictly limited run of 799 coupé units worldwide, positioning the model within Ferrari’s ultra-exclusive hypercar class. No additional coupé production is planned beyond this allocation.
Due to immediate global demand, early secondary-market transactions have already been observed above €5,000,000, reflecting a rapid revaluation of available slots before first customer deliveries.
This Ferrari F80 for sale is currently offered at €4,900,000, placing it above original factory pricing while remaining below the highest secondary-market indications observed to date.
Based on the original MSRP of €2,950,000, this price level represents an approximate increase of +66% over factory price, excluding taxes. This uplift reflects a combination of closed allocations, delivery certainty, and early-market scarcity rather than speculative mileage or configuration premiums.
As a Ferrari F80 slot, the asset retains full configuration flexibility prior to production, a factor that continues to support valuation compared to already-built or fixed-spec examples.
Ferrari F80 Slot for Sale – 1 of 799 | Open Configuration | Delivery in 2026
Acquiring a slot for the Ferrari F80 allows the buyer to reserve one of the 799 units produced and fully customize the configuration before production. This slot guarantees a scheduled delivery in 2026. Unlike purchasing an already-produced vehicle, this reservation provides access to paint options, interior materials, specific finishes, and custom equipment directly from Ferrari.
Full Technical Specifications – Ferrari F80 (Slot – 1 of 799)
Engine and Performance- Engine Type: 3.0L Twin-Turbo Hybrid V6
- Engine Position: Mid-Rear
- Number of Cylinders: 6 (V6)
- Displacement: 3,000 cm³
- Total Power Output: 1,200 HP
- Internal Combustion Power: Approx. 700 HP
- Electric Power: Approx. 500 HP (Distributed across three electric motors)
- Maximum Torque: 1,016 Nm
- Fuel System: Direct Injection, Twin-Turbocharging + Electric Assistance
- Hybrid System: Three Electric Motors (Two Front, One Rear)
- Battery Technology: High-Performance Lithium-Ion
Transmission and Chassis- Drivetrain: eAWD (Electric All-Wheel Drive)
- Transmission: 8-Speed Dual-Clutch (DCT)
- Chassis: Carbon Fiber Monocoque
- Suspension: Active Adaptive Suspension
Aerodynamics and Weight- Drag Coefficient (Cd): N/A
- Downforce: Active Aerodynamics
- Body Material: Carbon Fiber
- Dry Weight: 1,525 kg
- Weight Distribution: 42.2% Front – 57.8% Rear
Performance- 0–100 km/h: 2.15 seconds
- 0–200 km/h: 5.75 seconds
- Top Speed: 350 km/h
- Estimated Average Fuel Consumption: N/A
- Estimated CO₂ Emissions: N/A
Braking and Safety- Front Brakes: Carbon-Ceramic Discs, Brembo 6-Piston Calipers
- Rear Brakes: Carbon-Ceramic Discs, Brembo 4-Piston Calipers
- Regenerative Braking System: Yes, Integrated with Hybrid System
- Driver Assistance Features:
- Dynamic Torque Control (e-Torque Vectoring)
- Ferrari Traction and Stability Control (ESC)
- Customizable Driving Modes
- High-Performance ABS
Driving Modes and Technologies- Driving Modes:
- eDrive: 100% Electric Mode
- Hybrid: Optimized Combination of Internal Combustion and Electric Power
- Performance: Prioritizing Dynamic Performance
- Qualify: Maximum Power Output Mode (1,200 HP)
- Energy Recovery System: F1-Inspired KERS (Kinetic Energy Recovery System)
Exhaust and Sound- Exhaust Type: Titanium Exhaust System with Active Valves
- Sound Profile: Inspired by Le Mans Endurance Prototypes
Production and Maintenance- Production Start: 2025
- Production End: N/A
- Number of Units: 799 (Coupé), with a Potential Aperta (Convertible) Version
- Recommended Maintenance Interval: N/A
- Estimated Annual Maintenance Cost: N/A
Ferrari F80 SLOT for sale - LUSSO
Photo credits: Ferrari©
